EN
The BK Stainless Steel Centrifugal Pump range is designed for clean-water supply, tank transfer, irrigation, circulation, and light commercial water duties. Stainless steel pump components, a ceramic/graphite mechanical seal, and an aluminum alloy motor housing support compact surface installations. Five models from 0.37 kW to 1.5 kW provide maximum flows from 4.8 to 30 m³/h and heads from 9.2 to 18 m, with a 7 m maximum suction lift. BK50 uses 1-inch connections, while BK75 through BK200 use 1.5-inch connections. IP44 protection, Class B insulation, external ventilation, and a built-in thermal protector support continuous clean-water operation within the stated limits.
The CM100 Domestic Centrifugal Water Pump is a compact clean-water solution for household supply, garden irrigation, tank transfer, and small pressure-feed systems. Its cast iron pump body and support, aluminum alloy motor housing, and brass or 304SS impeller options provide a practical configuration for surface-mounted installations. The available CM/CPM models range from 0.37 kW to 2.2 kW, delivering maximum flows from 5.1 to 8.4 m³/h and maximum heads from 22 to 55 m. With a maximum suction lift of 9 m, IP44 protection, Class B insulation, external ventilation, and thermal protection, the range supports clean-water applications within the stated operating conditions.
The JETDP Self-Priming Deep Well Jet Pump is an ejector-based surface pump for clean-water supply from deeper well sources, domestic distribution, garden irrigation, and tank filling. The series includes JETDP225, JETDP370, DP505A, and DP750A models from 0.55 kW to 1.5 kW. With E25 and E30 ejector options, the range provides maximum head values from 30 to 70 m and maximum flow values from 1.8 to 3.0 m³/h. Cast iron hydraulic parts, brass impellers, PPO venturi components, IP44 protection, external ventilation, and a built-in thermal protector support stable operation in the stated conditions.
The STM Automatic Peripheral Water Pump is a compact surface-mounted solution for household water supply, low-pressure boosting, garden irrigation, tank filling, and clean-water transfer. The series includes STM250(A), STM300(A), STM370(A), STM550(A), and STM750(A) models, ranging from 0.25 kW to 0.75 kW. They provide maximum flows from 1.8 to 3.0 m³/h and maximum heads from 25 to 50 m, with a maximum suction lift of 9 m. A cast iron hydraulic section, brass impeller, aluminum alloy motor housing, IP44 protection, Class B insulation, external ventilation, and built-in thermal protection support use within the stated operating conditions.
The CTP/BR Stainless Steel Centrifugal Pump range is designed for clean-water supply, circulation, irrigation, and light commercial transfer applications. It features stainless steel pump components, an aluminum alloy motor housing, a 304 stainless steel shaft, and a ceramic/graphite mechanical seal. CTP models use PPO impellers, while BR versions use 304SS impellers. The listed CTP range covers 0.37 to 1.1 kW, delivering maximum flows from 5.0 to 8.7 m³/h and heads from 18 to 34 m. With a 9 m maximum suction lift, IP44 protection, Class B insulation, external ventilation, and thermal protection, it supports clean-water use within the stated limits.
The CPM Centrifugal Pump range is a compact clean-water solution for domestic supply, garden irrigation, water transfer, pressure feed, and light commercial applications. Its cast iron pump body and support, aluminum alloy motor housing, and brass or 304SS impeller options support surface-mounted installations. Available models range from 0.37 kW to 2.2 kW, providing maximum flows from 5.1 to 8.4 m³/h and maximum heads from 22 to 55 m. With a maximum suction lift of 9 m, IP44 protection, Class B insulation, external ventilation, and built-in thermal protection, the CPM series supports clean-water operation within the stated conditions.
The DP Self-Priming Deep Well Jet Pump is an ejector-based surface pump for clean-water supply from deeper well sources, domestic distribution, garden irrigation, and tank filling. Available models include JETDP225, JETDP370, DP505A, and DP750A, with power from 0.55 to 1.5 kW. Using E25 or E30 ejector options, the range provides maximum heads from 30 to 70 m and maximum flows from 1.8 to 3.0 m³/h. Cast iron hydraulic parts, brass impellers, PPO venturi components, IP44 protection, Class B insulation, external ventilation, and built-in thermal protection support clean-water operation within the stated conditions.
The GS100 Automatic Self-Priming Pump range is designed for clean-water supply, automatic boosting, water-tower feeding, shallow-source lifting, garden irrigation, and small transfer systems. It includes the compact GS100 and STM models from 0.1 to 0.75 kW, delivering maximum flows from 1.5 to 3.0 m³/h and maximum heads from 21 to 50 m. The pumps use cast iron hydraulic parts, brass impellers, aluminum alloy motor housings, and optional automatic pressure-switch control. With up to 9 m suction lift, IP44 protection, Class B insulation, external ventilation, and thermal protection, the range supports clean-water service within the stated operating limits.
This series stainless steel centrifugal pump is applicable for conveying clean water free of abrasive particles and liquids chemically inert to the pump's constituent materials. It is deployable in water supply and circulation within cooling, heating, circulating, and air‑conditioning systems, and also finds utility in irrigation, as well as civil, industrial, and agricultural scenarios. The pump shall be installed in a sealed environment or, at a minimum, protected from harsh meteorological conditions.
Ideal for domestic water supply, it works with clean water (no abrasive particles), non‑aggressive chemicals, and gas‑mixed liquids—via built‑in venturi system. With high reliability, easy operation, and compact design, it's used for home water, garden irrigation, small liquid transfer, and continuous shallow well extraction (suits household depth needs). Efficient self‑priming saves priming time. Install in enclosed space or shelter from harsh weather (rain, wind) for stability.
This intelligent household self‑priming booster pump is an ideal for solving home water pressure issues, this pump is recommended for clean water (no abrasive particles) and liquids non‑aggressive to its materials. Featuring high reliability, a compact design, energy efficiency, and easy operation, it's widely used in domestic Equipped with an intelligent pressure switch for automatic start‑stop based on water pressure, it offers great convenience. Install it in an enclosed space or shelter it from severe weather for stable performance.
Recommended for pumping clean water (no abrasive particles) and liquids non‑aggressive to pump materials. Due to reliability, compactness, cost‑effectiveness, and ease of use, they are widely used in domestic water supply, automatic boosting, water tower feeding, well water lifting, and solar hot water boosting. The pump is also equipped with a simple pressure switch for automatic control. Install pumps in enclosed environments or ensure they are sheltered from bad weather.
The CGO SJET stainless steel self-priming jet pump is a compact and dependable solution for domestic water supply, shallow well extraction, and garden irrigation. Built with a full stainless steel pump body and a 304 stainless steel shaft, the SJET series resists corrosion in clean water and mildly chemical environments. Its integrated venturi self-priming system handles gas-mixed liquids without manual priming, making it a practical choice for household and small commercial applications. Five models ranging from 0.25 kW to 1.1 kW cover a broad range of head and flow requirements, with all units sharing a uniform 1-inch inlet/outlet for straightforward piping installation.
The CGO HFm centrifugal pump is a well-regarded self-priming water pump series built for domestic water supply and light commercial fluid transfer. Designed with a durable cast iron pump body and pump support, combined with an aluminum alloy motor housing, it strikes a practical balance between weight and robustness. The series handles clean water, non-aggressive chemicals, and gas-mixed liquids through a built-in venturi self-priming mechanism. With 12 models spanning 0.55 kW to 4.0 kW, the HFm centrifugal pump covers a wide performance window—from modest residential pressure boosting to moderate industrial transfer—within a compact, installer-friendly footprint.
The CGO VCP series is a compact vertical centrifugal pump built for reliable clean water conveyance across HVAC, irrigation, and light industrial settings. Covering a power range of 0.37 kW to 0.75 kW, each model integrates an aluminum pump body, aluminum impeller, and an energy-efficient motor into a space-saving vertical configuration. With maximum heads up to 36 m and flow rates reaching 4.2 m³/h, this water circulation pump fits mid-rise building services, agricultural distribution networks, and process cooling loops where consistent, low-maintenance fluid handling is the core requirement.
The CGO SCM2 double impeller centrifugal pump is built around a twin-stage brass impeller configuration that generates substantially higher head pressure than a conventional single-stage design. Five models—SCM2-45 through SCM2-68—span 0.75kW to 2.2kW and deliver maximum heads from 35m to 60m, making the SCM2 a reliable high head centrifugal pump for building water supply, HVAC circulation, and agricultural irrigation where head demands routinely exceed what a single-impeller cast iron centrifugal pump can provide. IP44 protection, Class B insulation, S1 continuous-duty rating, and an embedded thermal protector round out a specification designed for demanding, long-run installations.
The CGO PUN hot water centrifugal pump is a compact, single-stage residential water pump built for handling liquids up to 60°C. Combining a cast iron body with an aluminum alloy motor housing and a plastic impeller sealed by a ceramic/graphite mechanical seal, this domestic hot water pump delivers dependable performance across a wide range of household and light commercial tasks. Three models—PUN-201EH (200W), PUN-401EH (400W), and PUN-601EH (600W)—cover flow rates up to 6.9 m³/h and heads up to 20m. Running on standard 220V/50Hz with IP44 protection and Class B insulation, the PUN hot water centrifugal pump is a straightforward, long-service choice for installers and distributors alike.
The SMC multistage centrifugal pump from CGO is a compact, self-priming water pump built for domestic water supply, garden irrigation, and shallow well extraction. A cast iron pump body, PPO or 304 stainless steel impeller, and ceramic/graphite mechanical seal give this multistage centrifugal pump a robust foundation for continuous S1 duty. Four models—SMC-2S through SMC-5S—cover heads from 25 to 55 m within a 0.37 to 1.1 kW power range. With IP44 protection, Class B insulation, and a built-in thermal overload, this cast iron centrifugal pump is a solid, low-maintenance choice for residential and light-commercial clean water applications.
The CND centrifugal pump from CGO is a single-phase clean water pump built around a cast iron body with a PSU or 304 stainless steel impeller. Designed for continuous S1 duty, this industrial centrifugal pump handles liquid temperatures up to 60°C and delivers up to 8.7 m³/h flow at 34 m head. Four CND models cover 0.37 to 1.1 kW, and the HTM32-160A extends capacity to 2.2 kW for higher-flow installations. With IP44 protection, a built-in thermal overload, and Class B insulation, the CND centrifugal pump is a dependable cast iron water pump suited for water supply, HVAC circulation, and irrigation.
The F Series self-priming centrifugal pump from CGO is a compact, high-reliability domestic water pump engineered for residential, agricultural, and light commercial water supply systems. Featuring a built-in venturi mechanism, this self-priming centrifugal pump draws water efficiently without manual priming, making it ideal for garden irrigation, household water distribution, and shallow well extraction. Available in four power configurations—from 0.75 kW to 2.2 kW—the F Series pump handles clean water and non-aggressive chemicals with equal efficiency. Whether you need a dependable venturi self-priming pump for daily home use or a garden irrigation pump for large outdoor spaces, the F Series delivers consistent performance and lasting durability for global wholesale buyers.
JL3000 series pump can be used to transfer clean water or other liquids similar to water in physical and chemical properties. Suitable for industrial use and urban water supply, domestic water supply, high building, long distance water transfer and related auxiliary equipment etc.
The AUTOCPm/CM100 automatic pump station from CGO is a complete, ready-to-install water pressurization unit combining a self-priming jet pump with a 24L diaphragm pressure tank, PS-9 pressure switch, 7 Bar pressure gauge, five-way brass connector, and flexible hose. Designed for residential, agricultural, and light commercial applications, this automatic pump station draws water from depths up to 9 meters and maintains steady system pressure through automatic start/stop control.
The CGO self-priming water pump is a highly reliable, compact, and cost-effective fluid-handling solution engineered for both residential and light industrial applications. This versatile domestic water pump excels at pulling clean water and non-aggressive liquids from depths of up to 9 meters without requiring manual priming after the initial setup. Designed for continuous-duty operation, the self-priming water pump utilizes a robust cast iron body paired with premium brass impellers and a 304 stainless steel welded shaft to ensure long-term performance. Whether used for HVAC recirculation, garden irrigation, or boosting household pressure, this self-priming water pump delivers consistent pressure and flow day after day.
The XKM/PX Peripheral Self-Priming Pump is a compact, dependable clean water pump built for domestic and light industrial water delivery. This self-priming water pump draws from below-grade sources without manual pre-fill, reaching a 9-meter suction lift and building up to 35 meters of head. The cast iron body with protective coating, 304SS inserts, brass impeller, and IP44-rated motor with built-in thermal protection make the XKM/PX peripheral pump a practical choice for home pressurization, garden irrigation, HVAC recirculation, and general industrial water supply — two models in one proven design, ready for global deployment across 220V/50Hz and on-request voltage configurations.
EN
